Hand-held Portable Leak Detectors 

Omnitron Portable Gas Detekta Pen

(Product Ref DB4000)

The Omnitron gas detector has been developed for the purpose of detecting minute traces of all combustible gases in and around gas pipes, fires, boilers and cookers. Suitable for Gas Engineers - Caravan Owners - Boat Owners - B-B-Q safety - In and around the home - Bottle Gas

Specification

Detects Flammable Gases
Range: 0 - 10,000 ppm
Detectable Gases: LNG, LPG, Butane, Methane and Isobutane Gas
Duration of use: 4 hours continuous
Weight: 25g

Product Includes

2 x AA Batteries & Wrist Strap

CE Certified

 

Omnitron Carbon Monoxide Meter

(Product Ref OMN7701)

  • Designed to comply with residential and workplace standards.
  • Auto zero and auto-calibration features.
  • Auto power-off after 10 mins of inactivity.
  • Long-life electrochemical sensor.
  • High repeatability /selectivity to CO gas.
  • Linear relationship between CO gas concentration and sensor output.
  • Reduced influence by various interference gases.

Applications :

  • Residential and commercial building CO detectors.
  • CO monitors for industrial applications.
  • Ventilation control for indoor parking.
  • Gas furnaces, room heaters, central heating furnaces, water heaters ,ranges, ovens, stores, fireplaces etc.

Specifications:

  • Measuring Range: 0 - 999 ppm
  • Accuracy: ±20% at 0 - 100 ppm ±15% at 100 - 500 ppm
  • Power Supply: 3 x AAA batteries
  • Response time: <60 sec
  • Operating Humidity: 5~99% RH (no condensation)
  • Storage Condition: -40~70°C
  • Operating Temperature: -10~60°C
  • Dimensions: 175 x 47 x 28mm
  • Includes: Wrist-strap, carry pouch & batteries, 1 x portable hand held carbon monoxide meter

Note : The Portable Hand held Carbon Monoxide Meter is Pre Calibrated - and includes a simple step by step guide on how to calibrate this product as and when it is required

CE Certification

 

Omnitron Portable Gas Detector With Gooseneck

(Product Ref OMN1001)

An instrument for industrial use with a high sensitivity and wide detecting range. It can be used to detect methane, natural gases, coal gases, hexane, propane, ethyne, butane, pentane, isopropyl alcohol, halogenation hydrocarbon (Methanol, Ethanol, Butanol), aether, ketone (butone, protone), hydrogen, toluene, and other compounds (gasoline, industrial solvent, lacquer, refrigerant, sulphur dioxide, ammonia, sulphurated hydrogen, acetic acid etc.).

Features:

  • Using this Portable Gas Detector with Gooseneck it gives a quick response to gas leakage source
  • Long and flexible gooseneck tube
  • Adjustable sensitivity
  • Varying audio frequency relative to gas concentration
  • 30 Level light to show gas concentration level change


Specifications:

  • Minimum Sensitivity: 50ppm
  • Response Time: <10 Sec
  • Visible Indication: 30 level LED/ Tricolor Indication (green: low; yellow: mid; red: high)
  • The Portable Gas Detector with Gooseneck also has Audio Indication: Buzzer frequency relative to gas concentration level
  • Power: 5v rechargeable Mains Plug in NI-H battery
  • Battery Life: 8 hours continuous use
  • Size: 170 x 62 x 26mm (L x W x H) 350g
  • Working Conditions: <98% RH, no condensation